Mustang Mid-Sized Skid Loader
The 2056 Series II skid-steer loader from Mustang features a 68 hp Yanmar Interim Tier IV diesel engine that produces 180 ft-lbs of torque. It can lift 2,050 pounds over 121 inches when equipped with 12.00 tires and optional counterweight. The 59.7-inch-wide loader (offset tire package available) has a tilt-back ROPS, large engine cover for easier maintenance and open-front design for increased visibility. Control options include joystick, hand-foot and dual-hand with standard or high-flow auxiliary hydraulics. 800/628-0491; www.mustangmfg.com.
RIDGID Manual Hydraulic Benders
Manual hydraulic benders from RIDGID are designed for precise cold bending of standard gas pipe (DIN 2440), black steel Schedule 40 (ASTM A53) and stainless steel Schedule 40 pipe. Bending shows in real time the angle the pipe is bent, reducing the number of starts, stops and pipe removals to take measurements. Durable piston seals prevent premature leaks and maximize uptime. User fatigue is minimized due to handle design, which minimizes the number of strokes to advance the piston. Benders are available in two models: 3/8- to 2-inch capacity (Model HB382) and 3/8- to 3-inch capacity (Model HB383). 800/769-7743; www.ridgid.com.
Wahl Heat Spy Thermo Imaging Camera
The Heat Spy high-speed 30 Hz, 160 by 120 pixels thermal imaging camera from Wahl Instruments Inc. is available in two series with 16 different configurations. The z30 series Detector is designed for on-the-spot maintenance inspections and repair. The z50 series Inspector is designed for users required to document and prepare reports. The upgradable camera eliminates the need to buy multiple units for different applications. The z30 model features 11 languages, four color palettes, C, F or K degree measurements scales, hot/cold seeking and two fixed spot measurements. The z50 offers an additional seven color palettes (11 total), built-in emissivity table for lookup, measurement offset correction, digital camera and image storage via SD card. 800/421-2853; www.palmerwahl.com.
Grote Side Turn Lamps
Six-LED side turn lamps from Grote Industries come in three styles, each with a choice of either male pin or hard shell connectors. The grommet-mount version is made for traditional applications and direct placement of existing grommet-mount installations. The integrated flange-mount version is low-profile and comes with matching mount pad. The compact surface-mount style has a small footprint, is lightweight and has a low profile. 800/628-0809; www.grote.com.
Cusco Omnivac Series of Vacuum Trucks
The Omnivac series of vacuum trucks from Wastequip’s Cusco features a complete baghouse and air cannon pulsation cleaning system. Other features include a secondary system that uses an air-cooled 360 cfm vacuum pump. It also provides a smaller, more efficient source of vacuum for applications that do not require the full 1,400 cfm capability or where blower operations are restricted. The unit has five operating modes: 1,400 cfm wet mode in both vacuum and pressure, 1,400 cfm dry mode in vacuum and 360 cfm industrial mode in both pressure and vacuum. 877/468-9278; www.wastequip.com.
BinMaster Pro Remote
The Pro Remote capacitance probe from BinMaster enables the sensor’s electronic components to be mounted 75 feet away from the sensing probe. The point level indicator is designed for hostile applications, including high temperatures and excessive vibration. The remote can be used for high, mid and low level detection of solids, liquids or slurries using a variety of probe options. 800/278-4241; www.binmaster.com.
Tommy Gate Medium-Duty Railgate
The 3,000-pound capacity, high-cycle railgate for stake and van bodies from Tommy Gate is designed for numerous daily lifting cycles. Features include machined steel rollers, dual-sealed ball bearings, hardened-steel pulleys and composite bushings. Other features include safety trip bar, self-close and auto-open cam arm, 12-inch platform taper and three-light, incandescent light kit. 800/543-8428; www.tommygate.com.
Knaack Crane Lift Accessory Kit
The crane lift accessory kit (model 497) from Knaack LLC provides secure attachment points for strapping and hoisting of Knaack job site boxes. The system enables storage equipment weighing up to 2,500 pounds to be safely lifted and carried. The kit features four carbon steel lift brackets, mounting hardware and installation instructions. Field station model 119-01 has pre-punched holes to accommodate the lift brackets. The kit is tested and approved only for Knaack job site boxes. 800/456-7865; www.knaack.com.
Newson Gale Truck-Mounted Grounding System
The Earth-Rite MGV truck-mounted static grounding system from Newson Gale Inc. provides an extra level of safety during the transfer of flammable or combustible materials in hazardous areas. The system verifies the existence of an effective low resistance ground point and monitors the bonding connection throughout the transfer process. Powered by the truck’s battery, the system provides constant assurance of a 10 ohm or less connection to the ground point by way of a flashing green LED cluster. It also includes a pair of changeover contacts (DPDT) for connection to additional safety devices, such as strobe lights, audible alarms or for interlocking with the vacuum pump or control valve. The system’s stainless steel clamp with universal clamping jaws is made for connection to flat or rounded surfaces, including common ground rods. 732/961-7610; www.newson-gale.com.
General Hot-Shot 400 Pipe Thawing Machine
The Hot-Shot 400 pipe thawing machine from General Pipe Cleaners delivers 400 amps of thawing power that can clear frozen 1 1/2-inch-diameter lines up to 175 feet long. Weighing 30 pounds, the dual-level unit can be switched down to 320 amps for pulling 14 amps and can be plugged into any standard outlet. 800/245-6200; www.drainbrain.com/hotshot.
Super Products Durasucker Vacuum Truck
The Durasucker liquid vacuum truck from Super Products is DOT/ASME approved for use in industrial and environmental cleanups. The truck has a 3,200-gallon capacity and is designed for removing and transporting liquids, sludge and semi-solid waste. The 72-inch carbon steel tank has a maximum working pressure of 35 psig internal and 15 psig external (full vacuum). 800/837-9711; www.superproductscorp.com.
