The Primax MH300i bypass pump from AllightPrimax features stainless steel front and rear wear plates and impeller, plus a new bearing bracket setup. The drive coupling covers power requirements and resonance to suit any pump and engine combination. This enhances durability and reduces fuel consumption, emissions and maintenance costs. 704/587-3377; www.allightprimax.com.
SP Series slurry pumps from Cornell Pump are designed to transport strong, abrasive slurry with high concentration of solids, at pH levels 5 to 12. Available in chrome/iron and rubber configurations, the pumps feature a Cycloseal design with deflector vanes to remove solids and abrasive material from the seal area while purging air and gas pockets. The pumps can be retrofitted for existing slurry pump installations. 503/653-0330; www.cornellpump.com.
Kevlar pump vanes
Lamitex vacuum pump vanes from Franklin Fibre are tested composites for North American- and European-manufactured pumps in light- to heavy-duty demands at temperatures up to 350 degrees F. Construction is of American-made virgin Kevlar fabric and high-temperature phenolic resin. The vanes are designed for all commercial-duty pumps used in oil and gas, environmental, septic and waste management applications. 302/652-3621; www.franklinfibre.com.
The Fruitland Manufacturing RCF500 vacuum pump offers efficient performance in a small package, including an automated oiling system with all steel lines, pump oil level sight gauge, vane gauging ports, anti-shock design, three primary cooling phases, and integral air-intake filter designed to work on both vacuum and pressure. The pump comes in configurations to work with any vacuum truck or trailer. Hydraulic and gearbox drive adapters make hookup easy. The pump is designed to make service and rebuild quick and easy, and has a two-year parts and service warranty. 800/663-9003; www.fruitland-mfg.com.
Prime Aire Plus vacuum-assisted pumps from Gorman-Rupp feature 3- to 8-inch sizes and are suitable for clear liquids and those containing large solids. All pumps are available coupled to the latest U.S. Environmental Protection Agency Tier 4-compliant engines or premium efficiency (EISA) electric motors. They employ a Venturi/compressor priming system, with the compressor integral on the engine version and shelf-mounted on the electric units. Features include adjustable running clearances, integral seal oil chamber, ductile iron body and impeller, two lip seals and an atmospheric vent, oil-lubricated bearings, retrofit capability and fuel level monitoring system. 419/755-1011; www.GRpumps.com.
Zero emission pump
The pumped fluid in the Zero Emission Pump from Hammelmann is hermetically sealed within the pump, preventing leakage during operation. The pump combines a vertical compact integral speed reduction gear end, channeling oscillating forces downward to avoid unwanted lateral oscillations. The integral speed reducer with twin helical gears ensures smooth running and even power transmission without axially loading the bearings. A selection of gear ratios is available. The compact construction eliminates the need for an external gearbox and prevents rotary oscillation. Compact 3, 5 and 7 cylinder pumps are available for injection service with input capabilities up to 1,500 hp. 800/783-4935; www.hammelmann.com.
The WT30X trash pump from Honda Power Equipment offers a commercial-grade engine, full-frame protection, a quick release clean-out and silicon carbide mechanical seals. The pump includes a conical-shaped cast iron impeller for improved priming and durability, replaceable stainless steel wear plates, silicon carbide water seals, lightweight cast aluminum pump housing, mounts to minimize vibration, and a multi-tool for on-site pump servicing and clean-out. The pump features a Honda GX240 OHV engine (242 cc), pumps a maximum of 319 gpm, and can pump solids up to 1 1/16 inches in diameter. It features full-frame, 3-inch suction and discharge ports, standard oil alert, silicon carbide mechanical seal and a replaceable stainless wear plate. 678/339-2600; www.powerequipment.honda.com.
Sand slurry pump
The S6CSL submersible 6-inch hydraulically driven sand slurry pump from Hydra-Tech Pumps has a built-in agitator to stir up heavy solids. The pump has hardened wear components and is intended for use in applications where settled solids must be put into suspension and pumped away with the discharge water. The primary applications include de-silting, dredging and moving driller's mud; other uses include tank and digester cleaning or pumping sediment from caissons. It requires hydraulic inputs of up to 28 gpm at 2,900 psi. It will pump up against head pressure up to 130 feet. 570/645-3779; www.hydra-tech.com.
Methane removal pump
The Pumps 2000 America AODD design from Megator includes 1/2-, 1-, 1 1/2- and 2-inch designs capable of passing up to 1 1/2-inch solids. A fire-retardant anti-static (FRAS) conductive plastic carrying an Atex M1 rating is also a proprietary feature for use in explosive situations. The system can be used for dewatering and methane gas removal. The air motor is stall-free, kept smoothly running without any lubrication, and uses low air consumption. The material resists deterioration even in low pH locations. The high-suction lift allows for more efficient usage over time while designed to be maintenance-free. 412/963-9200; www.megator.com.
Plunger pumps from Moro USA are high-pressure triplex water pumps designed for a variety of industrial applications. Producing liquid flow up to a water temperature of 140 degrees on standard pumps (higher temperature ratings are available), the double-projection drive shaft can be operated by pulley, flexible joint or cardan shaft. The pump includes ceramic plungers, double-pressure packings, vertical-fitted valves, water spill venting and oil-bath mechanical parts with splash lubrication. They are available with a maximum flow rate of 128 gpm and maximum pressure of 22,000 psi. Versions include stainless steel or aluminum-bronze fluid ends for pumping corrosive liquids. 800/383-6304; www.morousa.com.
Centrifugal trash pump
The Multiquip MQ600TD80 6-inch suction/discharge centrifugal trash pump can be trailer-mounted to provide quick mobile response. The pump-end includes the pump casing, intermediate covers and support flanges that provide a tensile strength of 30,000 psi. The pump also has an abrasion-resistant impeller, volute, mechanical seal, wear plate, shafts and sleeves. It is powered by a DEUTZ 63 hp (2,000 rpm) air-cooled diesel engine supported by a water-resistant control box with a LED warning light panel. It offers the operator a flow rate of 1,600 gpm and head to 150 feet, and handles of solids up to 3 inches in diameter. 800/421-1244; www.multiquip.com.
Mounted slurry system
Sodimate, Inc.'s mounted slurry system integrates a slurry tank, skid pumps and controls, and is pre-wired and ready to use, allowing for quick installation and startup. Typical slurry tank fabrication material includes high-density polyethylene (HDPE), stainless steel or fiberglass, and volume can range from 130 to 500 gallons. Dust-free, the skid pump system is fabricated for use with dry hydrated lime, powdered activated carbon (PAC) and polymers. 773/665-8800; www.sodimate-inc.com.
The NOVAPLEX vector pump from SPX Flow Technology is a powerful diaphragm process pump suited for high-pressure installations. The pump is ideal for toxic or chemically aggressive liquids, and for slurries/suspensions with particle sizes up to 100 micrometers. Typical applications include methanol injection for oil production, chemical reactor feed, CEOR, and high-pressure chemical transfer/circulation. 800/252-5200; www.spx.com.
The portable 6-inch 6JCC high-head pump from Thompson Pump delivers 1,100 gpm, high heads to 490 feet and 212 psi with automatic initial priming and re-priming. Uses include high-pressure applications such as clear waterjetting, water boosting, wellpoint installation, water supply for hydraulic fracturing, washdowns, tank cleaning and fire protection. The Enviroprime System prevents spilling pump fluids during operation. Additional options, such as Silent Knight sound-attenuated canopy, accessories, applications assistance and alternatives, are available. 800/767-7310; www.thompsonpump.com.
Vertical immersion sump pump
The Series 800 industrial vertical immersion sump pump from Vertiflo Pump Company can be used for sump drainage, flood control and process drainage to meet EPA and U.S. Occupational Safety and Health Administration (OSHA) requirements. It is designed for severe service at heads to 230 feet and temperatures to 350 degrees F and operates in pit depths to 26 feet and up to 3,000 gpm. It includes carbon line shaft bearings, semi-open impeller with external adjustment, high-thrust angular contact ball bearing, 416 stainless steel shafts to 1 15/16 inches and a standard NEMA C face motor. Construction materials available are cast iron, 316 stainless steel or alloy 20. 513/530-0888; www.vertiflopump.com.