1. Makita hammer driver-drill

The LXPH03 hammer driver-drill from Makita U.S.A. is powered by an 18-volt lithium-ion battery, delivering 750 inch-lbs. of torque. Featuring a four-pole motor, it produces 30,000 bpm and 2,000 rpm. The tool is 8 7/8 inches long and weighs 5.1 pounds with battery. 800/462-5482; www.makitausa.com.

2. Titan in-bed diesel fuel tank

The 60-gallon polyethylene in-bed diesel fuel tank from Titan Fuel Tanks fits most full-sized pickups. Made to resist the corrosive properties of diesel, biodiesel fuels and additives, the 51-pound customizable tank is fully baffled to prevent load shifting. It can be secured using eye-nuts or the optional utility riser bracket, which allows for up to 4 inches of clearance for under-tank storage. 800/728-4982; www.titanfueltanks.com.

3. Atlas Copco post driver

The 39-pound LPD-LD post driver from Atlas Copco is designed for handheld or crane-lifted driving jobs from 3/8- to 6-inch poles, steel rods or profiles. The driver accepts rods or posts less than half an inch to 2.5 inches. A PTFE guide bushing reduces the risk of damage to the zinc or copper surface of the round rods. The anvil is designed to directly strike the top of the rod or pole when a bushing adapter is fitted. When a larger drive adapter is used, the anvil will strike the adapter. 800/732-6762; www.atlascopco.us.

Related: Industry News - February 2013

4. Baldwin nanofiber air filters

Extreme performance air filters from Baldwin Filters feature ProTura nanofiber technology. Made for mining applications, the fibers average 90 mm in diameter and are bonded to cellulose media. 800/822-5394; www.baldwinfilter.com.

5. FreeWave board version wireless data radio

The FGR2-P board-level version, license-free, long-range wireless data radio from FreeWave Technologies offers industrial serial and Ethernet wireless connectivity. It can be incorporated into the Rockwell Automation family of PLC solutions in the water, wastewater, and oil and gas industries. 800/548-5616; www.freewave.com.

6. KROHNE Tantalum mass flowmeter

The Tantalum straight tube Coriolis mass flowmeter from KROHNE, a version of the Optimass 7300, measures highly aggressive or corrosive fluids that require glass-lined piping or glass-lined process vessels. Tantalum has similar chemical resistance as glass and is typically used with chemicals such as hydrochloric, sulphuric, nitric and phosphoric acids, or bromine and chlorine. The meter intelligently tunes itself, independent of external forces and fluid density. 800/356-9464; www.us.krohne.com.

Related: WWETT Show 2016: Product Preview

7. Ditch Witch horizontal directional drills

The JT30 Mach 1 and JT30 all-terrain horizontal directional drills from Ditch Witch have a 160 hp Tier 4i engine and assisted makeup and break-out, enabling the machines to automatically adjust carriage thrust speed when making up and breaking out drill pipe. The drills operate at a maximum 85 dBa and are 80 inches wide without the optional enclosed, climate-controlled cab. 800/654-6481; www.ditchwitch.com.

8. Smith Flow Control portable valve actuator

The Easi-Drive portable valve actuator from Smith Flow Control enables one user to operate multiple valves with a single tool, reducing fatigue and injury risk. The tool, powered by air, electricity or battery, is effective on valves that require a high number of turns or are otherwise difficult to operate because of high torque or location. 859/578-2395; www.smithflowcontrol.com.

9. Remlinger belt-driven power ditchers

PFM belt-driven power ditchers from Remlinger Mfg. are available in center cut and offset models. Able to cut ditches up to 12 inches deep in a single pass in most soil conditions, the ditchers have a spring-tensioned, self-adjusting belt drive. The rotor has labyrinth shielded bearings and four reversible cutting blades with adjustable 18- to 20-inch diameters. 800/537-7370; www.remlingermfg.com.

Related: October Product News

10. Electric Eel ACE2 pipeline inspection system

The Ecam ACE 2 pipeline inspection system from Electric Eel Mfg. Co. has one-touch USB recording, on-screen footage counter and wheel kit for easy transportation and maneuverability. Features include 1.68-inch-diameter color camera, 200 feet of Kevlar-braided 1/2-inch-diameter push cable, 512 Hz sonde, 5.4-inch LCD monitor, reel brake and centering skid. 800/833-1212; www.electriceel.com.

11. Detcon wireless gas detection system

The stand-alone SmartWireless Site Sentinel battery-powered gas detection system from Detcon is designed for fixed, semi-fixed and transportable use in light and heavy industrial environments. The system monitors for toxic and combustible gases and can be customized. Each system can handle 32 detectors, consisting of any combination of wired or wireless devices. Fault diagnostics are available locally or through a link to other members of the network. Power options include disposable batteries, rechargeable battery packs with solar options and line power. 713/559-9200; www.detcon.com.

12. McElroy polyethylene pipe roller

The Mega McRollers pipe roller from McElroy Manufacturing is designed for 12-inch IPS to 54-inch O.D. polyethylene pipes. The rollers keep pipe off the ground and aid in the pulling of fused pipe. They are tip-resistant and have a capacity of 9,000 pounds per unit. 918/836-8611; www.mcelroy.com/fusion.

13. GoatThroat remote discharge taps

The RT Series of remote discharge taps from GoatThroat Pumps offers precise control of fluid delivery to point of use for low-viscosity liquids. The thermoplastic, injection-molded, hand-operated taps deliver liquids, ranging from drops to gallons, to beakers, weighing scales or day tanks from the original chemical source. 866/639-4628; www.goatthroat.com.

14. ECCO self-adhesive warning lights

Stick-A-LED warning lights from ECCO are designed to provide a powerful warning signal with easy installation. The lights require a single wiring hole and two-wire connection. The self-adhesive backing allows placement on any flat surface. Lights are available in oval (3 LEDs), triangle (3 LEDs) and rectangle (6 LEDs). Each model has a polycarbonate base and lens with integrated optics for enhanced light dispersion. 800/635-5900; www.eccolink.com.

15. FCI air/gas flowmeter

The ST785 air/gas mass flowmeter from Fluid Components International delivers flow measurement while reducing the consumption of energy fuel gases, specialty gases and pneumatic air. When installed with multiple gas compressors, the meter enables operators to compare compressor usage and adjust for optimum efficiency. The meter is designed for line sizes from 0.25 to 2 inches. 800/854-1993; www.fluidcomponents.com.

16. Larson Electronics rail-mount LED work light

The Magnalight WAL-JH-2XWP400 rail-mount LED work light from Larson Electronics features dual LED light heads and multiple mounting options with adjustable J-hook ladder-mount bracket. The light produces 2,924 lumens of white light, distributed in a flood pattern, illuminating 15,000 square feet of work space. 800/369-6671; www.magnalight.com.

17. Iowa Mold Tooling articulating cranes

Truck-mounted 40- and 50-ton articulating cranes from Iowa Mold Tool Co., an Oshkosh Corp. company, feature long-reach capabilities and minimal space requirements. The 40/275 crane has a maximum lifting capacity of 19,026 pounds, and the 50/345 model has a maximum capacity of 22,840 pounds. Both models can be equipped with up to eight hydraulic extensions for maximum horizontal reaches of 69 feet, 11 inches and 70 feet, 3 inches. 800/247-5958; www.imt.com.

18. General Pipe handheld inspection tool

The Gen-Eye Micro-Scope handheld inspection tool from General Pipe Cleaners has a 39-inch probe rod for hard-to-reach areas. The monitor attaches to the reel with an adjustable mount. The reel carries up to 100 feet of micro push rod with color camera for inspecting 1 1/2- to 3-inch drain lines. Other features include 3.5-inch LCD screen, built-in SD card reader with one-touch record button, digital zoom, rotatable picture, voice over recording, LED brightness control, USB port and on-screen status indicators. 800/245-6200; www.drainbrain.com.

19. Harvard peristaltic pumps

The remote-controlled, programmable peristaltic pump series from Harvard Apparatus, designed for incubators and flume hoods, feature interchangeable pump heads and pre-programmed profiles for constant flow, flow ramps, pulsatile flow and concentration-based fluid delivery. Pumps include control unit, tethered pump head, cartridge/cassette and sample tubing. Flow rates range from 0.001 to 1,500 mL/min, depending on pump head. 800/272-2775; www.harvardapparatus.com.

20. Xylem CentriPro 4-inch submersible motor

The CentriPro Xtreme Duty 4-inch submersible motor from Xylem Applied Water Systems is designed for sandy wells and coal bed methane applications. A silicon carbide mechanical seal and felt diaphragm filter prevent coal fires and other abrasives from entering the motor. Available in single-phase (2 to 5 hp, 230 volt) and three-phase (3 to 7.5 hp, 230 volt and 3 to 10 hp, 460 volt), all sizes have a 17-4PH stainless steel shaft and 1,500-pound thrust bearings. www.xylemappliedwater.com.

21. Coxreels high-pressure hose reel

The HP1125 high-pressure hose reel from Coxreels has an operating pressure of up to 5,000 psi. The external fluid path features an electroless nickel-plated steel 90-degree, full-flow NPT swivel inlet and chemical-resistant AFLAS seals. Other features include one-piece, all-welded A-frame base, low-profile outlet riser and open drum slot design for non-crimping, smooth hose wrap. The high-pressure option is available for 1/2- and 3/4-inch hose reels. 800/269-7335; www.coxreels.com.

22. Electro Static split universal mounting kit

The AEGIS SGR bearing protection ring split universal mounting kit (Split uKIT) from Electro Static Technology protects VFD-driven motor bearings from electrical damage and allows quick retrofitting of the ring on most AC motor shafts without decoupling attached equipment. The kit includes split AEGIS ring and mounting hardware (screws, washers, Allen wrenches and four styles of brackets). Brackets can be attached to NEMA or IEC motor faceplates by drilling, tapping or conductive epoxy (available). 866/738-1857; www.est-aegis.com.

23. Sage thermal mass flowmeter

The RIO ATEX Zone 1 thermal mass flowmeter from Sage Metering features the In-Situ field zero calibration check, wide turndown, drift-free operation, high-contrast graphical flow rate display and explosion proof, dual-sided NEMA 4X enclosure. Flow rate also is displayed graphically in a horizontal bar graph format. The meter is powered by 24 VDC (115 VAC/230 VAC optional). 831/242-2030; www.sagemetering.com.

24. Bingham & Taylor valve box sealed system

The Buffalo no vac valve box sealed system from Bingham & Taylor Corp. features a valve box stabilizer and debris trap (available together or separately). The stabilizer fits all round valve box bells and bases. Designed for use with cast iron or plastic valve boxes, the stabilizer prevents the intrusion of dirt, backfill or sand from below. The debris trap eliminates maintenance and service issues caused by debris intrusion through and around the valve box cover over time. 540/825-8334; www.binghamandtaylor.com.

25. Ty-Rap polyester-coated ball-lock cable ties

Ty-Rap polyester-coated stainless steel ball-lock cable ties from Thomas & Betts Corp. feature a low-smoke, halogen-free polyester coating that releases fewer toxins if burned. Additional safety features include rolled edges on the strap that eliminate the risk of damage to cables and injury to installers. Made of marine-grade 316 stainless steel, the ties are corrosion-, impact- and abrasion-resistant with a temperature range of -40 to 302 degrees F. 901/252-5000; www.tnb.com.

26. Graphic Products pipe marking guide

The free DuraLabel wastewater treatment pipe marking guide from Graphic Products provides a standard color coding system to identify pipe contents. 888/326-9244; www.GraphicProducts.com.

27. Martin Engineering conveyor belt cleaner

The conveyor belt brush cleaner from Martin Engineering features a rotating design that removes material accumulation and dust in difficult applications. The brush has a 1 hp motor for cleaning 18- to 42-inch belts and 2 hp motor for cleaning 48- to 96-inch belts. 800/544-2947; www.martin-eng.com.

28. Draeger portable single gas monitor

The X-am 5100 portable single gas monitor from Draeger detects hydrogen fluoride (HF), hydrogen chloride (HCl), hydrogen peroxide (H2O2) and hydrazine (N2H4) reactive gases. Applications include monitoring alkylation units in the petrochemical industry and checking HF during the injection process for the extraction of crude oil. The monitor is dust- and water-resistant and has an IP54 rating. www.draeger.com.

29. Optronics stop, tail, turn lamps

The GloLight series of LED stop, tail and turn lamps from Optronics International features a smoothly illuminated outer band surrounding a central LED array that remains unlit during standard operation. Available in 4-inch round and 6-inch oval sizes, the lamps meet FMVSS 108 and SAE photometric requirements for visibility and safety. Lenses and housings are made of sonically welded polycarbonate material. The lamps have a solid-state, surface-mount device that protects the electronics against moisture, shock and vibration. 800/796-8909; www.optronics.com.

30. Worksaver skid-steer adapter

The skid-steer adapter from Worksaver is made for tractors equipped with John Deere loaders (models 146/148/158) and pin-on buckets retained with 1 1/8-inch pins. The adapter has an all-welded design, plated handles, spring and lock pins. 217/324-5973; www.worksaver.com.

31. KSB gate valve with pressure seal

The ZTS gate valve with pressure seal bonnet from KSB has a hammer-forged steel body, enabling it to handle water, steam, gas, oil and other non-aggressive fluids at temperatures up to 1,200 degrees F and pressures to 8,700 psi. 804/222-1818; www.ksbusa.com.

32. Sandpiper pump support mobile app

The Sandpiper mobile app from Warren Rupp enables users to locate information related to a specific pump using My Pump Details by scanning the QR code on the pump tag. Users also can view the spare parts installation video and service manual for a specific pump. Additional features include the ability to review chemical compatibility and watch service and training videos. 419/524-8388; www.sandpiperpump.com/mobile_app.asp.

33. RIDGID soil pipe cutter

The 238-P powered soil pipe cutter from RIDGID cuts soil pipe in hard-to-reach places, including rafters or below grade. Weighing 13.5 pounds and 11.5 inches long, the cutter is designed for use with a 1/2-inch impact driver. The chain can cut no-hub cast iron, service weight cast iron, and clay pipe up to 8 inches in diameter and concrete pipe up to 6 inches in diameter. Two-direction operation enables the user to score pipe before cutting, while the torque limit protects against overloading. 800/769-7743; www.ridgid.com.

34. Asahi/America double-wall piping system

The Chem Prolok thermoplastic double-wall piping system from Asahi/America meets EPA requirements for underground chemical transfer and is NSF/ANSI 61-G certified for drinking water. Applications include water and wastewater treatment chemical feed systems, acids, caustics, sodium hypochlorite, mixed chemicals, compressed gases and process piping, pressure or drainage. Sizes range from 1 by 3 inches through 12 by 16 inches. 800/343-3618; www.asahi-america.com.

35. NPC wellpoint pump

The NPC PT-90 wellpoint pump from National Pump & Compressor, available for rent or sale, has 6-inch connections, with a flow rating of 396 gpm and 65 feet of TDH. The PT-90 burns 0.4 gallons of fuel/hour which, in some cases, adds up to over $5,000 in fuel savings a month. Available in open diesel, stackable frame, compact or economy canopy, enclosed units emit 49 dBa at 30 feet. 888/840-5886; www.npcrents.com.

36. Reed Manufacturing rotary cutters

Rotary cutters from Reed Manufacturing Co. are available for large and small pipe diameters. The RC42S cutter is designed for manual cuts on 40- to 42-inch steel pipe. An included wrench tightens the cutter that requires 11.8 inches clearance. The LCRC4 Low Clearance Rotary Cutter is made for 2- to 4-inch steel, cast iron and ductile iron pipe and requires 4-inch clearance. 800/666-3691; www.reedmfgco.com.

37. Solimar Pneumatics manhole cover

The 20-inch-diameter manhole cover from Solimar Pneumatics has a single pivoting ball handle and 4.25-inch profile with no protruding clamps for added safety. Features include leak-free, self-sealing hollow gasket for a tight fit, and cast-aluminum construction. The manhole is DOT-407 compliant with a working pressure of 30 psig and test pressure of 45 psig. 800/233-7109; www.solimarpneumatics.com.

38. Denso Protal air cartridge gun

The Protal air cartridge gun from Denso North America sprays 1,000 mL cartridges and is designed for easy setup, minimal material waste and maintenance for pipeline corrosion protection. The gun includes a swivel handle and optional shoulder strap. 888/821-2300; www.densona.com.

Related Stories