Fontaine Magnitude 60 Class trailer

The Magnitude 60 Class lowbed trailer from Fontaine Heavy-Haul is fabricated with 100,000-pound minimum yield steel flanges. It has a 26-foot clear deck and loaded deck height of 22 inches with 6 inches of ground clearance. The DSR model (drop side rail) has a 14.5-inch loaded deck height. 205/467-6171;

American Carrier all-steel bottom dump trailer 

The all-steel, tandem-axle, semi-bottom dump trailer from American Carrier Equipment is designed for severe-duty applications. The ACE bottom dump kingpin functions as a solid, finished bearing, helping to absorb and disperse lateral stresses exerted through pull and brake torque. 800/344-2174;

Fluid Components air/gas flowmeter

The ST100 air/gas flowmeter from Fluid Components International can be calibrated to measure most process gas, including wet, mixed and dirty gases and stores five unique calibration groups or differing mixtures of the same gas, and has a plug-in card replacement that can be changed out in the field. Features include a graphical, multivariable, backlit LCD display. The readout continuously displays all process measurements and alarm status. It also can query for service diagnostics. 800/854-1993;

Related: Industry News - February 2013

Felling Trailer air ramp

Air ramp technology from Felling Trailers, available on over-the-road semi trailers, can raise 5,000 pounds. The air ramp operates via an air bag system that works off the air brake without an external power source. The air lift is available in 36-inch, 45-inch and full-width options. 800/245-2809;

Subaru centrifugal pumps

The PKX line of centrifugal pumps from Subaru Industrial Power Products includes self-priming 2-, 3- and 4-inch models. The 2-inch PKX201 pump is powered by the EX13 4.5 hp Subaru engine and delivers 158 gpm. The 3-inch PKX301 is powered by a 6 hp EX17 engine and delivers 256 gpm. The 4-inch PKX401 pump is powered by a 9 hp EX27 engine and delivers 356 gpm. 800/277-6246;

B&W gooseneck trailer hitch

The GNRK 1314 aftermarket gooseneck trailer hitch for 2013 RAM 3500 trucks from B&W Trailer Hitches features a Turnoverball design that enables the hitch ball to invert in its mounting socket when not in use and stow flush with the truck bed. 800/810-4918;

Related: WWETT Show 2016: Product Preview

SEL power quality, revenue meter with IEC  

The SEL-735 power quality and revenue meter with IEC functionality from Schweitzer Engineering Laboratories supports systems built from multivendor intelligent electronic devices (IEDs) networked to provide protection, monitoring, automation, metering and control. IEC 61850 features include up to six manufacturing message specification client sessions for logging and reporting data, the ability to publish and subscribe to generic object-oriented substation event (GOOSE) messages and support for device configuration using substation configuration language (SCL) and configured IED description (CID) files. 509/332-1890;

Moxa HD dome camera 

The VPort P26A-1MP-T fixed-dome high-definition IP camera from Moxa Americas is engineered for harsh environments. Designed to operate in -40 to 167 degrees F, features include high EMI/surge protection, IK10 vandal-proof dome cover, metal housing and IP66-rated rain and dust protection. The camera has a built-in dehumidified membrane for diffusing moisture, preventing fogging, icing or overheating. 714/528-6777;

Rugby Eliminator LP dump bodies 

Redesigned carbon steel, aluminum and stainless steel Eliminator LP dump bodies from Rugby Mfg. are available in 9- and 11-foot lengths. A 12-foot model is available in carbon steel and aluminum. The steel model has a seamless, one-piece, 10-gauge steel floor. All models are available with fold-down sides and EZ-LATCH upper tailgate mechanism. 701/776-5722;

Related: October Product News

Kobelco crawler excavator 

The 48,500-pound, midsize SK210LC crawler excavator from Kobelco Construction Machinery USA has a 157 hp Tier IV Hino engine with three push-button operating modes: H for heavy, S for standard and ECO for reduced fuel consumption. The excavator has a digging force of 28,880 pounds, dig depth of 22 feet and 1.05 cubic yard bucket. The ease-of-entry cab has large windows on all sides, double-slide seat, AM/FM radio, cup holder and storage tray. 281/888-8430;

KOHLER 2,500 kW generator

The 2,500 kW (model 2500REOZDC) generator with V-16 engine from KOHLER Power Systems has a 60 Hz standby rating, 50 C cooling system, heavy-duty air cleaner and dual-bearing alternators. The generator is International Building Code (IBC) 2012 seismic-certified. It also meets NFPA 110 requirements, providing power in less than 10 seconds. 800/544-2444;

Manitou telescopic handler 

The MT 5519 telescopic handler from Manitou has a 69 hp water-cooled Yanmar tier IV certified diesel engine, two-speed hydrostatic transmission with inching valve and three selectable steering modes. The handler has an overall height of 6 feet 4 inches and 11-foot turning radius. The low-profile boom reaches to 19 feet 1 inch and has a 5,500-pound lift capacity. The ROPS/FOPS canopy has a 360-degree view. An enclosed cab with front and top windows, door and heater/defroster is optional. 262/334-9333;

BOMAG light tandem roller

The BW100AD-4 tandem vibratory roller from BOMAG Americas, powered by a Tier 4i, 32.6 hp, water-cooled Kubota diesel engine, delivers up to 8.35 pounds of centrifugal force per drum and a maximum frequency of 4,200 vibrations per minute. Safety features include ROPS with safety belts, backup alarm and emergency stop button. The roller’s engine cover and dashboard lock to protect against vandalism. 800/782-6624;

SEI ready-to-ship pumps

Ready-to-ship pumps from SEI Industries include transfer pumps for diesel or jet fuel (100 or 150 gpm) and vehicle pumps (30, 60 or 90 gpm). Each vehicle pump is housed on a skid with filtration and flowmeter. All models have a welded bottom (with drain) to prevent minor spills and drips. 855/734-8265;

RIDGID SeeSnake with self-leveling head

The SeeSnake Max rM200 camera system from RIDGID with self-leveling head takes the guesswork out of inspections, providing clear, right-side-up images or video. 800/769-7743;

Snap-on industrial torque wrench

The Control Tech industrial torque wrench from Snap-on Industrial features all-steel construction and a backlit LCD screen with storage capacity for 1,500 readings. Other features include 3/8- or 1/2-inch drive, flex- or interchangeable heads, 40 memory presets, LED indicator lights and audible alert and handle vibration that signal when torque is within targeted range. 773/491-9500;

Dialight LED linear fixture

The SafeSite LED linear fixture from Dialight is designed for Class I, Division 2 hazardous applications. The fixture is intended to replace traditional fluorescent and HID (high-intensity discharge) lighting. Delivering 106 lumens per watt, the fixture is available in 2-foot (33 watt) and 4-foot (66 watt) models and stands less than an inch tall. 732/919-3119;

Ensinger high-performance plastic 

Thick gauge 24- by 48-inch high-performance plastic plates from Ensinger are available in 5- and 6-inch thicknesses, with 8-, 9- and 10-inch-diameter rods available in 5-foot lengths made from TECAFORM copolymer acetal and Delrin homopolymer acetal. Resins, such as TECAPEEK and TECAPEI are available in 19.68-inch widths. 800/243-3221;

JWCE grease receiving, screening system

The Heavy Object Trap (HOT), model GRS, grease receiving and screening system from JWC Environmental has a variable bar screen with 1/2- and 1-inch spacings to capture and direct heavy objects, including rocks, silverware and trash into the debris basket. The largest basket can hold up to 2.2 cubic feet of material. The bar screen design and hot water washdown system prevents screen blinding for high flow rates of grease. The HOT system is available in six sizes with a maximum flow rate of 600 gpm, operating pressure of 15 psi and 4- or 6-inch pipelines. 800/331-2277;

Husky DEF nozzles 

Diesel exhaust fluid dispensing nozzles from Husky Corp. are available in stainless steel and polymer. The stainless steel nozzles have an operating range of 12 to 86 degrees F. Features include removable cartridge assemblies for components that come in contact with DEF, automatic shut-off and three spout options. The polymer nozzles have an acetal body, stainless steel spout, weigh 1.5 pounds and have an automatic shut-off. 800/325-3558;

Reelcraft static discharge reel

The GHC3100 N industrial-duty static discharge reel from Reelcraft Industries stores up to 100 feet of high-visibility orange nylon jacketed cable. The manual rewind reel, when properly clamped to a ground, dissipates static electrical buildup, reducing the chance of sparking. 800/444-3134;

Mean Green industrial-strength degreaser

Mean Green Industrial Strength Cleaner & Degreaser from CR Brands is a blend of biodegradable detergents formulated for challenging fleet and equipment washing. The cleaner removes dirt, tar and road grime from vehicles and trailers and can be used for spot removal on carpets, seats and dashboards. It also degreases equipment, concrete and asphalt. It can be used with pressure washers and contains no environmentally harmful solvents.

Mouvex sealless drive eccentric disc pumps

The SLC4 and SLC8 sealless drive eccentric disc pumps from Mouve, part of the Pump Solutions Group, are designed for general industrial applications, as well as for handling chemical-based compounds. The pumps can handle up to 145 psi (SLC4) and 87 psi (SLC8). Features include self-priming and dry-run capabilities, temperature range of 5 to 212 degrees F, solid particle handling of 0.08 inches and soft particle size handling of 0.25 inches. Approved for use in ATEX atmospheres, a heating jacket is available. 909/557-2900;

Butterworth industrial tank cleaner 

The unidirectional BC tank cleaning machine from Butterworth, designed to remove machining oils from steel surfaces, creates a two-nozzle, cone-shaped circular cleaning pattern with impact impingement. 281/821-7300;

General Pipe Cleaners pipe-freezing repair kit 

The Cold-Shot pipe-freezing kit from General Pipe Cleaners enables repairs to be made on operating water systems without draining water lines, sprinkler systems or hot-water systems before cutting pipe or tubing. Carbon dioxide in dip-tube cylinders freezes liquids in steel, copper, cast-iron, aluminum or plastic pipes, 1/8 through 2 inches in diameter. The kit includes 10 sets of freeze heads, two high-pressure spiral hoses with injectors, rubber gloves, goggles and carrying case. 800/245-6200;

Optronics LED trailer lighting

GloLight LED lamps from Optronics International are designed for light- and medium-duty trailer lighting. The FMVSS 108 compliant lamps combine light diffusing material for a smooth, glowing appearance on one portion of the lens that contrasts with bright spots of illumination on another. Available in 14 styles, the 12-volt lamps, lenses and housings are made of polycarbonate material that is sonically welded and waterproof. 800/364-5483;

Martin high-speed roller cradle 

The EVO high-speed impact cradle from Martin Engineering Co. is designed to reduce roller and frame damage from heavy conveyor loading conditions in mining, coal handling, aggregates and other applications involving dense materials or high volumes. The cradles feature Trac-mount technology to slide in and out for easy, one-person maintenance. The modular components can be removed by hand without heavy lifting equipment. 800/544-2947;

HBC-radiomatic linus 4 transmitter

The updated linus 4 transmitter from HBC-radiomatic is available with two joysticks (up to four steps) or four stepless levers in combination with push buttons, toggle switches or rotary switches. The transmitter weighs approximately 2 pounds with battery and has an LED to indicate operating/battery status. Options include radiomatic infrakey, tandem operation, pitch-catch and micro/orthogonal drive. 800/410-4562;

In-Situ environmental monitoring app

The smarTROLL hand-held multiparameter and iSitu smartphone application from In-Situ are designed for environmental monitoring, including water quality spot checks and surface water monitoring. No training is required to use the probe or intuitive smartphone application. Technicians can read results for 14 water quality parameters. The iSitu app is designed to run on an iPhone, iPod touch or iPad. The smarTROLL system includes probe, smart sensors and clip-on battery pack with Bluetooth wireless technology. 800/446-7488;

Gamajet Bullet IV tank cleaning machine 

The Bullet IV tank cleaning machine from Gamajet is designed for targeted cleaning of sludge, oil or residual debris that collects at the bottom of large tanks, open-top tanks, process vessels and trailers. The unit rotates in a 105-degree downward pattern. High-impact water jets scour the bottom of the tank without oversplash. 877/426-2538;

GMI maintenance-free single gas monitor

The maintenance-free PS1 Series single gas monitor from Gas Measurement Instruments features sensor options for monitoring hydrogen sulphide, oxygen, carbon monoxide or sulphur dioxide. The self-monitoring device has on/off capability and field-adjustable alarm settings. During hazardous conditions, users are alerted via vibration, red flashing LEDs and audible buzzer. The monitor has a stainless steel alligator clip that attaches to a collar or vest, putting it near the breathing zone for maximum protection. 713/559-9290;

Makita 14-inch power cutter

The EK7651H 14-inch, 4-stroke power cutter from Makita U.S.A. delivers added power over two-stroke engines and eliminates the need for oil/fuel mixture. Operating at 97.2 decibels, the cutter uses 0.45 gallons of fuel per hour. The automatic engine decompression valve provides easier pull starts, while the pressure-compensated carburetor with vented choke plate adjusts automatically to prevent flooding. For improved handling, the integrated aluminum wheel kit retracts when not in use. 800/462-5482;

Atlas Copco centrifugal compressors

The ZH 355+ and 900+ range of oil-free centrifugal compressors from Atlas Copco are based on computational flow dynamic (CFD) analysis to reduce pressure drops and energy consumption by 7 percent at full load compared to previous models. Certified for Class 0 air quality, features include milled impellers and servo controlled inlet guide vanes. 800/732-6762;

PCI bobtail vacuum tank 

Bobtail vacuum tanks from PCI Manufacturing are available in 60-barrel (2,520 gallons), 70 (2,940), 80 (3,360), 90 (3,780), 100 (4,200) and 110 (4,620) capacities and can be customized to meet specific applications. Features include a wedge sump, rear blowdown and three-point rear access to the catwalk. The design has a 5-inch drop from front to rear, allowing for quicker clean out. Divided hose hooks enable the tank to accommodate two sets of different size hoses. A front sight tube is viewable from the driver’s seat. Tanks are sold as complete kits for customer mounting, including bumpers, spring-based frame mounts and multiple configurations. Complete installation is available. 800/256-5633;

Juniper field mapping software

Aspect 1.2 field mapping software from Juniper Systems is designed for any job that requires locating, documenting and inspecting assets. It can import large amounts of data into Excel and operates on most devices running Windows Mobile 6.0 or higher. 435/753-1881;

Related Stories