Gehl RT Series track loaders
RT Series radial-lift track loaders from Gehl feature Tier IV Yanmar diesel engines with 69.9 hp and 217 ft-lbs of peak torque on the RT175 GEN:2 and 72 hp with 217 ft-lbs of peak torque on the RT210. The RT175 has a rated operating capacity of 1,700 pounds, while the RT210 has a rated operating capacity of 2,100 pounds. The RT175 weighs 8,605 pounds and the RT210 weighs 9,890 pounds. Both models deliver 10 feet 6 inches of lift height. 800/628-0491; www.gehl.com.
Pelican Products protector case
The CE1250 Pelican ProGear Samsung Galaxy S4 protector case from Pelican Products is designed to survive a 6-foot drop. The case features snap-together construction and smooth outer shell finish. It is available in black, white, purple, gray and blue color combinations. 800/473-5422; www.pelican.com.
Manitou boom tip lift hook
The boom tip lift hook option from Manitou, designed for select MT Series telescopic handlers, provides a secure lifting point for transporting suspended loads without the use of an additional attachment. The hook option can be installed in the field by replacing one pin and has the same lift capacity and load zone ranges as the standard fork and carriage. 262/334-9333; www.manitou.com.
Atlas Copco 1 megawatt generator
The QAC 1200 1 megawatt generator from Atlas Copco Construction Mining Technique is engineered to U.S. and Canadian specifications. The generator has a Cummins QST30G5 Tier 2 certified diesel engine and provides 1140 kVA/912 kW prime power rating (60 Hz). The integrated fuel tank provides a minimum run time of eight hours. The 20-foot container and spillage-free frame offers complete compliance with environmental regulations and efficient transportation. 800/732-6762; www.atlascopco.us.
BTI wear-resistant elbow
The SandHog Super Elbow from BTI is an alternative to metal fittings and hose-type unloading configurations. The extreme wear-resistant elbow allows for side unloading, as well as rear unloading. The elbow comes standard at 45 degrees; connecting two of the elbows together offers a 90-degree option. It is available in four industry standard cam and groove configurations: female to female, female to male, male to female and male to male. 800/841-5524; www.bulktankinc.com.
ExakTime tracking hub software
TimeSummit 1.4 time tracking hub from ExakTime includes employee curtaining, daily overtime by location and employee expense tracking. Employee curtaining shows supervisors only the employees they need to track at their specific job site. Daily overtime tracking by location enables an administrator to set different overtime rules at job sites. Employee expense tracking provides data on custom-set expenses, such as tools, supplies, meals and travel. 877/435-6411; www.exaktime.com.
Endress+Hauser multiparameter transmitter
The Liquiline CM44x multichannel transmitter from Endress+Hauser features EtherNet/IP connectivity for seamless integration with the Rockwell Automation PlantPax process automation system. The integrated Web server enables the operator to remotely view diagnostic data, perform configuration or access device parameters. The modular four-wire transmitter is available in one- to eight-channel expandable versions. 888/363-7377; www.us.endress.com.
Thomas & Betts interconnection systems
Russellstoll interconnection systems by Thomas & Betts Corp., a member of the ABB Group, range from 20 to 600 amps. Maintenance free, they are fully polarized for exact voltage, frequency and phases. Solderless pressure screw terminals and rear access combined with take-apart housings provide quick wiring access. 901/252-5000; www.tnb.com.
Roxtec wire and cable sealing
BG (bonding and ground) cable from Roxtec is designed for sealing large quantities of metal clad or armor cables in the least amount of space. Used on offshore oilrigs, onshore building structures, cabinets and enclosures to ensure electrical safety, applications include running cables through bulkheads, decks and cabinets. Sealing systems protect against water, fire, gas, blast load and vibration. 800/520-4769; www.roxtec.com.
Hyundai Construction wheel loader
The HL730-9A wheel loader from Hyundai Construction Equipment Americas has a fuel-efficient, low-noise 128 hp Cummins Tier 4 Interim and EU stage IIIB QSB4.5 engine. Featuring an automatic transmission, the wheel loader has a 2.5-cubic-yard bucket with 20,170 pounds of breakout force. 877/509-2254; www.hceamericas.com.
Water Cannon water-cooled pressure washers
Roll-cage protected water-cooled Kubota pressure washers from Water Cannon are available in 2-, 3- and 4-cylinder models and up to 7,000 psi. Accessories include 50-foot hose, wand, trigger gun and QC nozzle. The industrial-duty diesel model includes fork-lift channels, removable roll cage with lifting hooks, optional wheel kit and onboard, long-run fuel tank. 800/333-9274 Ext. 101; www.watercannon.com.
Snap-on pneumatic torque wrenches
Pneumatic torque wrenches from Snap-on have a dual-speed gearbox with rundown gear, delivering speeds up to 100 rpm and torque gear for slower rpm. The sealed housing prevents water, dirt and debris from entering the wrench. A variety of high-strength reaction arms are available. 262/656-5337; www.snapon.com.
Vactor remote information system
The VactorTRAK remote information system from Vactor Manufacturing monitors and reviews cleaning operations on Vactor 2100 Plus combination sewer cleaners. It also can be retrofit onto Vactor 2100 Plus trucks. The system collects and transmits operational data to a secure hosted website where it can be accessed from any Internet-connected device. In addition to specific job review, the system enables operations managers to view statistics for each unit or an entire fleet over a given period of time to determine total sewer lines cleaned, jobs performed, water and fuel consumed. 800/627-3171; www.vactor.com.
FLIR E-Series thermal cameras
E-Series thermal cameras (E4, E5, E6, E8) from FLIR Systems feature 3-inch color LCD display, wide-angle autofocus lens, intuitive camera controls, onboard digital camera and MSX (multispectral dynamic) technology that integrates visible details from digital camera photos onto thermal images. The E4 weighs 1.2 pounds and has four-hour battery life. All models have center spot measurement mode. 866/477-3687; www.flir.com.
Force Control clutch brake
The Size 30 Posidyne clutch brake with Oil Shear Technology from Force Control Industries can be operated as a clutch only for applications such as pumps or fans, or as a clutch brake for cycling or indexing. The brake dynamically accelerates or decelerates high inertia loads without wear on friction discs. 513/868-0900; www.forcecontrol.com.
Aggreko remote monitoring
Aggreko Remote Monitoring (ARM) provides real-time asset monitoring and dedicated diagnostic support of generators and oil-free air compressors, including dedicated diagnostic support from the Remote Operations Center. Based in New Iberia, La., the center coordinates rapid response to alarm notifications throughout North America by evaluating data and initiating the most efficient response. 281/985-8286; www.aggreko.com/?en-US.
Conveyor Components belt alignment
The Model TA belt alignment control from Conveyor Components Co. is a deviation switch for belt conveyors when they become misaligned due to an unbalanced load, high speed or belt damage. Used in mining, coal and iron ore handling operations, the control is made of cast aluminum with a steel, red epoxy coated, spring-loaded roller arm and stainless steel shaft. The standard roller arm is 10 inches. A 5-inch arm is available. The arm is adjustable up to 90 degrees in both directions. 800/233-3233; www.conveyorcomponents.com.
BOMAG cold milling machine
The rear rotor design BM-35 Series cold milling machine from BOMAG Americas is available in three models (BM1000/35, BM1200/35, BM1300/35). It features intuitive controls and low noise levels. The vibration-isolated operator’s stand has a swivel seat design that enables all work to be done while seated. Control ergonomics are complemented by straightforward switches, levers and clear read-out displays. 800/782-6624; www.bomag.com/us.
NK Technologies three-wire current transducer
The DT Series three-wire current transducer from NK Technologies uses a common point for both power supply and output signal. Factory calibrated for a single current range, the transducer features industry standard outputs of 0-5 or 0-10 VDC proportional to the DC current. Applications include photovoltaic panel monitoring, hoists, DC motor protection and wind-driven generators. 800/959-4014; www.nktechnologies.com.
KNIPEX water pump pliers
Cobra XL (No. 87 01 400) and Cobra XXL (No. 87 01 560) water pump pliers from KNIPEX Tools feature push-button adjustment that fully opens the jaw. A clicking sound confirms the jaws are locked in place. The Cobra XL is 16 inches long, weighs less than 3 pounds and has a 3 1/2-inch grip. The Cobra XXL is 22 inches long, weighs less than 6 pounds and has a 4 1/2-inch grip. 847/398-8520; www.knipex-tools.com.
Coxreels fluid path 1195 Series reels
The 1195 Series fluid path reel from Coxreels has an inline swivel, remodeled low profile outlet riser and improved operating pressure range (1,000 psi). Featuring a one-piece, all-welded A-frame base, the reel is designed to handle 50 to 125 feet of 2-inch hose. The NPT swivel is anchored to a bearing assembly machined from solid billet aluminum. 800/269-7335; www.coxreels.com.
Kalenborn Abresist basalt-lined piping
Basalt-lined piping from Kalenborn Abresist Corp. is designed to withstand raw sewage, grit, sludge, ash, limestone, dust and other abrasive mixtures conveyed hydraulically or pneumatically in sewage treatment plants. Pipes, elbows and fittings are custom engineered for each application and available in a variety of end connections to retrofit existing systems. 800/348-0717; www.abresist.com.
Hypertherm air plasma cutting system
The Powermax125 portable air plasma system from Hypertherm cuts 1 1/2-inch-thick metal at speeds up to 18 inches per minute, and can sever metal more than 2 1/4 inches thick. The gouging system can remove more than 27 pounds of metal an hour. 800/643-0030; www.hypertherm.com.
LUDECA tablet-based pump motor alignment app
The tab@align tablet-based pump motor alignment app from LUDECA combines PRUFTECHNIK laser measurement technology with a tablet and smartphone devices. The app runs on Apple and Android mobile devices and can be downloaded free from the Apple App Store or Google Play. 305/591-8935; www.ludeca.com.
Asahi/America prep tool
The socket welding PREP (peel, remove, edge and plane) tool from Asahi/America is designed for removal of oxidation on thermoplastic pipe and fittings before welding. The maintenance-free tool is available in six sizes, from 1/2 through 2 inches. Tools are available individually or in a kit. Manual handles and spare blades are available. 800/343-3618; www.asahi-america.com.
Reelcraft hand-crank hose reels
Series CH37000 hand-crank hose reels from Reelcraft Industries are designed for industrial applications requiring longer lengths of 1-inch hose. The static Oilite bearing helps eliminate possible misalignment due to heavy vibration. 800/444-3134; www.reelcraft.com.
Dialight LED hazardous lighting fixture
The ATEX/IECx certified 21,000 lumen SafeSite LED high bay from Dialight is designed for oil, gas, chemical, pretrochemical and other hazardous rated applications. The light includes an integrated power supply with 10 kV surge protection and is rated for 100,000 hours. It also is available in general purpose CE and UL versions. 732/919-3119; www.dialight.com.
Sioux Corp. steam generator
The SF-50 Steam-Flo steam generator from the Sioux Corp. is designed for accelerating the curing process in precast concrete, degassing tanks and thawing frozen pipes. The 50 hp boiler unit (stationary or trailer mounted) produces up to 1,725 pounds per hour of saturated steam vapor. The generator operates at 15 psi and is available with diesel, LP or natural gas-fired burners. 888/763-8833; www.sioux.com.
Kafko cleaner and degreaser
Oil Eater all-purpose cleaner and degreaser from Kafko International contains no acids, abrasives or petroleum solvents. The water-based, nonflammable and biodegradable cleaner is available in 32-ounce spray, 1-gallon bottles and 5-, 30- and 55-gallon containers. 800/528-0334; www.oileater.com.
Ergodyne ProFlex kneeling pad
The ProFlex 375 compact kneeling pad from Ergodyne fits in most standard tool bags and boxes. The 8- by 18-inch compact pad and 14- by 21-inch standard size kneeling pad are made from silicone-free nitrile butadiene rubber. The closed-cell foam is nonconductive and resistant to petroleum-based substances. The orange color makes it easily identifiable. 800/225-8238; www.ergodyne.com.
RIDGID laser distance meter
The micro LM-400 Advanced Laser Distance Meter from RIDGID can read distances up to 229 feet in length. Features include backlit, four-line display screen, inclination angle measurement system for indirect measurements in hard-to-reach areas, advanced calculation that can instantly adjust units to inches, feet or meters and storage for saving up to 20 measurements at a time. The meter is IP 54 dustproof, splash proof and has an auto shut-off after three minutes of inactivity to prolong battery life. 800/769-7743; www.ridgid.com.
ECD sulfide ion measurement system
The SMS-22 sulfide ion measurement system from Electro-Chemical Devices conditions the sample, measures the sulfide, neutralizes the sample, measures the pH, drains and rinses the cell. After measurement, the caustic sample pH is reduced to a safe level near pH 8. Sampling times are adjustable from two samples per hour to 10 samples per hour. 800/729-1333; www.ecdi.com.
Precision Digital NEMA 4X field-mounted meters
The Vantageview series of NEMA 4X field-mounted meters from Precision Digital Corp. offer the functionality and features of the ProtEX series of explosion-proof meters in an injection-molded plastic, NEMA 4X (IP65) enclosure. SafeTouch through-window buttons allow operation without removing the cover. Meters are available in 4-20 mA loop-powered and pulse input models powered by the output loop, DC or battery. 800/343-1001; www.predig.com.
Automation Products Group pressure transducers
PT-500 submersible pressure transducers from Automation Products Group are available with additional output, cabling, cage, vent cap and installation options. The transducers are available with 4-20 mA and Modbus output, as well as 0-5 VDC and mV/V. 888/525-7300; www.apgsensors.com.