Check out the latest product offerings for the oil and gas industry.
Komatsu parallel link undercarriage
The parallel link undercarriage system (PLUS) from Komatsu America Corp. is an option on the D155AX-8 dozer. Available with three shoe widths (24, 26 and 28 inches), the system is designed to provide up to twice the life of a conventional undercarriage and eliminates the downtime of pin and bushing turns. 847/437-5800; www.komatsuamerica.com.
Water Cannon jetter trailer
The 16T52 two-wheel commercial jetter trailer from Water Cannon has 500-foot by 3/8-inch hose reel capacity, 200-gallon water tank with float valve, polyurethane tool box, lights, front jack with wheel, safety chains and aluminum fenders. The commercial high-pressure jetter has a Vanguard 18 hp electric-start engine with 15-gallon fuel tank, TS Series General triplex plunger pump (5.5 gpm, 3,500 psi), 8-foot jumper hoses, and three jetter nozzles (penetrator, flusher and degreaser/deicer). 800/333-9274; www.watercannon.com.
HammerHead Trenchless Equipment Sidewalker piercing tool
The Sidewalker from HammerHead Trenchless Equipment is a piercing tool designed for installing short utility runs beneath landscaping, driveways and sidewalks. Upgrades to the 2 1/2-inch and 3-inch models have increased efficiencies in design and pneumatics, including the quarter-turn Power Port Reverse feature, which boosts impact power by up to 25 percent. The 3-inch Sidewalker now has a uniform profile along its entire length, increasing striker size. 800/331-6653; www.hammerheadtrenchless.com.
Exact Pipe Tools six-speed saw
The PipeCut 170E pipe cutting saw with six-speed control and constant torque from Exact Pipe Tools cuts 0.6- through 6.7-inch-diameter pipe from 0.31 (steel) to 0.55 inches thick (plastic). The interchangeable Diamond X Cermet (for cutting stainless steel) and TCT blades are fully concealed and create no sparks or dust for ultimate safety. A battery-powered version of the 5.7-pound saw is available. 844/392-2800; www.exacttools.com.
Ingersoll-Rand pump controller
The ARO pump controller from Ingersoll-Rand can be integrated with many existing ARO EXP pumps when an electronic interface package is added for a fully automated, multi-pump system for batching and container tank filling. The multi-pump controller can be programmed with remote triggers customized to the application in which it’s being used. The controller can perform auto-shutdowns when necessary, sending data and service alerts to the operator. It also can operate two pumps simultaneously, detect leaks, sense and respond to liquid levels, control portions and control flow rates. 704/655-4000; www.ingersollrandproducts.com.
Ring-O-Matic pull-behind jet/vac combo
The 550 dual pump combination sewer line jetter and vacuum excavator from Ring-O-Matic fits into spaces too confined for truck-mounted combination rigs yet can clean sewer lines up to 20 inches in diameter. Powered by an 81 hp Cat turbo-diesel engine, the jet/vac has a 1,000 cfm blower and can deliver 27 gpm at 2,700 psi up to 400 feet with its 3/4-inch hose. The trailer’s axles are rated to 16,000 pounds, enabling the 550-gallon spoils tank and 500-gallon freshwater tank to be pulled behind a 3/4- or 1-ton truck. 800/544-2518; www.ring-o-matic.com.
Blackmer oil-free reciprocating gas compressors
Triple-seal HD943 and HDL943 oil-free reciprocating gas compressors from Blackmer, part of PSG, a Dover company, feature a double-distance piece design with three individual sets of packing to maintain product purity and prevent oil migration. The compressors feature high-efficiency ductile-iron valves with PEEK valve plates, ductile-iron head and cylinders, three sets of self-adjusting filled PTFE packing sets on each piston rod for maximum leakage control, self-lubricating PTFE piston rings, precision-ground crankshaft and pressure-lubricated crankcase. 616/241-1611; www.blackmer.com.
Gorman-Rupp horizontal end suction centrifugal pumps
The 6500 Series of horizontal end suction centrifugal pumps from Gorman-Rupp Company are designed to handle water and up to 4-inch solids in wastewater treatment plants, industrial facilities, construction, mining and agricultural use. Sizes range from 3 to 16 inches, flows to 15,000 gpm and total dynamic head to 530 feet. Features include oversized bearings, atmospheric vent, side access inspection port (solids-handling models) and indexable Smart Scroll discharge locator. 419/755-1011; www.grpumps.com.
Advanced Pressure Systems fluid end pump parts
Fluid end precision-machined pump parts from Advanced Pressure Systems are designed for industrial cleaning contractors, resellers and petrochemical companies and refineries that have on-site waterjetting capabilities. Type 4200 and 3600 fluid ends are engineered for 150 to 325 hp and flows from 62.9 gpm at 5,000 psi to 25.2 gpm at 20,000 psi. 877/290-4277; www.waterblast.pro.
Crescent quick-convert nut driver set
The quick-convert nut driver set from Crescent Tools, part of the Apex Tool Group, provide the speed of a straight-handle driver with the torque of a T-handle driver in one tool. The set includes seven color-coded drivers for easy identification. The universal socket design fits six fastener types (hex, square, 12-point and E-Torx, partially rounded hex and spline) in both SAE and metric sizes. 919/362-1670; www.crescenttool.com.
Wilden AODD bolted metal pumps
The Brahma Advanced metal air-operated double-diaphragm (AODD) pump from Wilden Pump & Engineering, part of PSG, a Dover company, are designed for large solids passage and high performance in difficult applications. Incorporating flap valves, a unique top inlet and bottom discharge orientation, the pump is able to pass up to 3-inch solids. The pumps are submersible, self-priming and shear sensitive. They can run dry, handle pressures up to 125 psig and have maximum flow rates of 169 gpm (PS810) and 233 gpm (PS1510). 909/422-1730; www.wildenpump.com.
McLaughlin truck-mounted vacuum excavator
The MEGA VX200 truck-mounted vacuum excavator from McLaughlin features a spoils tank capacity from 1,200 to 3,000 gallons and the option of 800 gallons of water. The excavator has a 6-inch hose diameter with a 3,200 cfm blower at 18 inches Hg. The tank, power pack and water system have a modular design, enabling the contractor to mount the unit on a new or repurposed chassis. Powered by a 200 hp John Deere Tier 3 engine, the unit has a three-stage cyclonic filtration system that allows for wet and dry vacuum excavation. A cam-over hydraulic door provides a positive 360-degree seal without additional clamping requirements. 800/435-9661; www.mclaughlinunderground.com.
Doosan portable power air compressor
The utility mount P186 air compressor from Doosan Portable Power delivers 185 cfm free air and has a rated operating pressure of 100 psi. Features include full-sized locking doors for easier fluid and filter inspection. A lower positioned service air port and eye-level access to all controls and monitoring gauges ensure operator safety and convenience. The compressor is powered by a Tier 4 Final-compliant 49 hp Doosan D24 engine with diesel oxidation catalyst (DOC) aftertreatment system. 800/633-5206; www.doosanportablepower.com.
Wanner Engineering seal-less pump
The T80100 Hydra-Cell seal-less pump from Wanner Engineering delivers flow rates up to 96 gpm (3,300 barrels per day) at pressures up to 1,500 psi. The packing-free pumps are designed to replace horizontal multi-stage centrifugal pumps and packed plunger pumps in oil and gas applications. The seal-less, multiple-diaphragm design eliminates VOC emissions and the need for external lubrication and maintenance, as well as plunger wear. The pumps can run dry and will operate with a closed or blocked suction line. 800/369-4172; www.wannereng.com.
Inpro/Seal smart grounding shaft protection
Smart Shaft Grounding product portfolio (Smart CDR, Smart MGS, Smart Ground Monitor) from Inpro/Seal provides permanent protection from conduction-inhibiting shaft oxidation, providing continuous monitoring and feedback of shaft grounding performance. Isolated conductive filaments and zero-maintenance conductive bronze rotors provide connectivity in harsh conditions. The Smart Ground Monitor alerts users in real time of non-optimal contact between the filaments and shaft. Contact is measured through the Smart Terminal (standard on every Smart CDR and Smart MGS). Smart Shaft Grounding meets NEMA MG1 184.108.40.206 and CSI 23 05 13 specifications, available on standard and custom sizes. 800/447-0524; www.inpro-seal.com.
Industrial Video & Control HD camera
The APTZ-3045-06 high-definition, industrial video camera from Industrial Video & Control is designed and certified for use in hazardous environments. The 30x color pan-tilt-zoom camera offers 1080p resolution and low-light performance. The camera integrates with third-party security systems or can be operated through a SCADA system. 781/255-7400; www.ivcco.com.
New Holland compact wheel loaders
C Series compact wheel loaders from New Holland Construction feature Z-bar linkage on models W50C, W80C and W80C HS for increased breakout force, digging and lifting power. The parallel lift path of the W50C TC eliminates the need for manual correction. Designed to scrape, grade, push, rake and haul, all four models are powered by Tier 4 engines. Options include high-flow hydraulics (W80C only) that delivers 34 gpm at 2,900 psi, auto ride control, creep speed for applications that require slow and steady control, high speed (W80C only) and return-to-dig that returns the bucket to the dig position after dumping with the push of a button. 630/260-4000; www.newhollandconstruction.com.
Bayco dual-light headlamp
The Nightstick NSP-4608BC dual-light, multifunction LED headlamp with helmet lamp bracket clip from Bayco Products features five lighting modes, including a spotlight for distance and floodlight for close-up illumination. Powered by three AAA batteries, the headlamp is water rated to IP-X7 water rating, has a 2-meter drop rating and weighs 3.4 ounces. The high spotlight brightness mode is rated at 100 lumens for five hours. Low mode emits 90 lumens for 13.3 hours. High floodlight mode emits 60 lumens for 4 1/4 hours and 50 lumens for 13 3/4 hours in low mode. Dual-light mode delivers 180 lumens for 2 1/2 hours. 800/233-2155; www.baycoproducts.com.
Electric Eel pipeline inspection camera
The ACE 2 pipeline inspection camera system from Electric Eel Mfg. Co. features one-touch USB recording, on-screen footage counter, wheel kit for easy transport and heavy-duty screen cover. The inspection system has a stainless steel housed 1.68-inch-diameter color camera with sapphire lens, 20 LED light ring and high-resolution CCD element (optional self-leveling color camera), 200 feet of Kevlar braided 1/2-inch-diameter push rod, 512 Hz sonde, 5.4-inch LCD monitor with AR film for optimal viewing in sunlight. 800/833-1212; www.electriceel.com.
KOHLER diesel-powered mobile generator
The 55REOZT4 diesel-powered mobile generator from KOHLER Power Systems is EPA emission-certified for non-road use, mounted on a DOT-certified trailer and compatible with KOHLER’s Mobile Paralleling Box. Features include a KDI 3404 Tier 4 Final engine that does not require a diesel particulate filter, fuel tanks sized for 24-hour runtime, external emergency stop, stainless steel door latches and hinges, cold-weather package that includes block and battery heater, single-point lifting eye, sound-attenuating housing (69 dBA at 23 feet), voltage, current, frequency and power monitoring, analog inputs, warnings and faults monitoring. 800/544-2444; www.kohlerpower.com.
Goulds end suction centrifugal pump
The 316L stainless steel end suction centrifugal pump from Goulds Water Technology - a xylem brand, are designed for water circulation, booster service, spray system, washing/cleaning system, air scrubbers and general water services. The pumps can be mounted horizontally or vertically. The standard NEMA single- or three-phase motors are made for continuous duty under all conditions. 866/325-4210; www.goulds.com.
ICS PowerGrit Utility Saw pipe cutter
The 680PG-10 PowerGrit Utility Saw from ICS, a Blount International Brand, is a pipe cutter designed to cut plastic pipe to ductile iron pipe up to 10 inches in diameter. The new 680ES engine platform features a 76.5 cc, 5 hp engine and a direct-drive clutch, so the drive belt doesn’t slip in wet conditions, unlike most circular cut-off saws. 800/321-1240; www.icsdiamondtools.com.
Ring-O-Matic pull-behind jet/vac combo
The Ring-O-Matic 550 Dual Pump Combination Sewer Line Jetter and Vacuum Excavator gives contractors and municipalities the advantages of a dedicated combination jetter/vacuum truck in a versatile compact trailer unit. The Ring-O-Matic 550 can vacuum sewer lines up to 20 inches in diameter in spaces too confined for stand-alone jetters and vacuum excavators, or a carrier-mounted combo rig. Powered by an 81 hp CAT turbo diesel, the machine features a 1,000 cfm blower and can deliver 27 gpm at 2,700 psi up to 400 feet with its 3/4-inch jetter hose. Its trailer’s axles are rated to 16,000 pounds, allowing the 550-gallon spoils tank and 500-gallon freshwater tank to be easily pulled behind a suitably equipped 3/4- or 1-ton truck. 800-544-2518; www.ring-o-matic.com.